1. Turn your Webpal on and wait for the Main Menu to appear.
2. Click the Setup button.
3. Click the Internet button located at the bottom of the screen.
4. In the Number text box, type your local dial-up access number. Remember to check with your local telephone company to make sure that the number you choose is a local toll-free call.
5. Click the Dialer button located at the bottom of the screen.
6. If you are in an office and need to dial a number to access a telephone line, type it in the Dialing Prefix text box, immediately followed by a comma.
   For example: 9,
7. If you wish to disable call waiting, type *70, immediately followed by a comma. Not all areas use *70 to disable call waiting so if *70 does not work for you, contact your local telephone company for the correct code.
8. Click the Internet button located at the bottom of the screen to return to the Basic Internet Setup area.
9. In the Account text box, type your dial-up username.
   For example: username
10. In the password text box, type your dial-up password.
11. Click the Advanced button.
12. In the DNS Address 1 text box, type 68.93.224.10
13. In the DNS Address 2 text box, type 68.93.224.12
14. The DNS Address 3 text box should be blank.
15. The DNS Address 4 text box should be blank.
16. The Gateway text box should be blank.
17. The Proxy text box should be blank.
18. Leave roma.teknema.com in the Time Server text box.
19. The CHAP Server text box should also be blank.
20. Check the VJ Compression check box.
21. Click the Done button.