DigiTex.Net

ISDN: Install and Configure TCP/IP Operating System: Windows NT Operating System Version: 4.0 Hardware: Farallon Netopia ISDN Router

1. Double-click the My Computer icon.
   
2. Double-click the Control Panel icon.
   
3. Double-click the Network icon.
   
4. Click the Adapter tab.
   
5. If your network card is listed, go to step 6.
   

   	If your network card is not listed, follow the steps below.
   	Click Add, select your model from the list.
   	Click OK.
   	Verify the IRQ and I/O Port Address information
   	Click the OK button.

6. Click the Protocol tab.
   
7. If TCP/IP is listed, then go to step 8.
   

   	If TCP/IP is not listed, then follow the steps below .
   	Click the Add button.
   	Select TCP/IP Protocol from the list.
   	Click the OK button.

8. Double-click TCP/IP.
   
9. Select Specify an IP address.
   
10. In the IP Address text box, type 192.168.1.2
    
11. In the Subnet Mask text box, type 255.255.255.0
    
12. In the Gateway text box, type 0.0.0.0
    
13. Click the OK button.
    
14. Click the Close button.
    
15. Click the Restart button.