1. Put the Netopia CD-ROM in your CD-ROM drive.
   
2. If the Netopia Internet Software Starter Kit screen does not appear automatically, double-click the My Computer icon, then double-click the CD-ROM drive icon.
   
3. Click the >> button.
   
4. Click the >> button again.
   
5. Click the Smart Start button.
   
6. Click the Launch Smart Start for Windows 95/NT button.
   
7. Click Next.
   
8. In the IP Address text box, type 192.168.1.1
   
9. In the IP Mask field text box, type 255.255.255.0
   
10. Type your Farallon Netopia serial number (located on the bottom of the Netopia or on your Netopia Technical Support Access Card.)
    
11. Click the Submit button. The Farallon Netopia will reboot itself and go through a 10-second countdown.
    
12. Once the countdown has finished, click the Web Browser button.
    

     

Netopia Configuration

1. Click the Easy Setup button.
   
2. Check the Network Address Translation box.
   
3. Check the IP Address Serving box.
   
4. Click the OK button.
   
5. Click the right arrow.
   
6. Select the Switch Type for your ISDN line.
   
7. Enter your SPID 1 and SPID 2 information.
   
8. Enter your directory numbers.
   
9. Click the OK button.
   
10. Click the right arrow.
    
11. In the Connection Profile Name text box, replace Easy Setup Profile with DigiTex.net.
    
12. In the Number to Dial text box, enter your DigiTex.net ISDN access number.
    
13. In the Remote IP Address text box, type 127.0.0.2
    
14. In the Remote IP Subnet text box, type 255.0.0.0
    
15. Set PPP Authentication (Security) to PAP.
    
16. Click the OK button.
    
17. Click the right arrow.
    
18. In the Send User Name text box, type your DigiTex.net username. For example: username
    
19. In the Send Password text box, type your DigiTex.net password.
    
20. Leave Receive User Name and Receive Password blank.
    
21. Click the OK button.
    
22. Click the right arrow.
    
23. In the Default Gateway IP Address text box, type 127.0.0.2
    
24. In the Domain Name Server IP Address text box, type 206.160.192.10
    
25. Click the OK button.
    
26. Click the right arrow.
    
27. In the Number of Client IP Addresses text box, type 253
    
28. In the 1st Client Address text box, type 192.168.1.2
    
29. Click the OK button.
    
30. Click the right arrow.
    
31. Enter a Write Access Name and Write Access Password to password protect your Farallon Netopia. In order to make future configuration changes, you will need use the name and password you entered here, so it is important that you remember them.
    
32. Click the yellow lighting bolt button.
    
33. Click the Restart link.
    
34. Wait 10 seconds, click the Here link.
    
35. Close the web browser.
    

Reconfiguring TCP/IP

1. Double-click the My Computer icon.
   
2. Double-click the Control Panel icon.
   
3. Double-click the Network icon.
   
4. Choose the Protocol tab.
   
5. Double-click TCP/IP.
   
6. Select Obtain an IP address from a DHCP server.
   
7. Click the OK button.
   
8. Click the Close button.
   
9. Click the Restart button.