Configure

1. Switch Type = Type the switch type provided by your local telephone company
2. Chan Usage = Switch/Switch
3. My Num A = Type your ISDN phone number for channel 1
4. My Num B = Type your ISDN phone number for channel 2
5. SPID 1 = Type your SPID number for ISDN channel 1
6. SPID 2 = Type your SPID number for ISDN channel 2
7. Data Usage = A+B
8. Phone 1 Usage = A
9. Phone 2 Usage = B
10. Phone Num Binding = No
11. My Name = Type your DigiTex.net username. For example: username
12. My Addr = Type 192.168.100.100/24
13. Rem Name = Type digitex.net (This must be the same as information as in step 18)
14. Rem Addr = Type 100.100.100.100/24
15. Dial = Type your local DigiTex.net ISDN access number
16. Route = IP
17. NAT Routing = Yes The default is N/A. To set to yes scroll down and set the Bridge to No (step 19) then you can set the NAT Routing to Yes

    

18. NAT Profile = digitex.net (This must be the same as information as in step 13)
19. Bridge = No
20. Send Auth = PAP
21. Send PW = Type your DigiTex.net password
22. Recv Auth = None
23. Recv PW = N/A
24. Save = Press the Enter key to save settings
25. Hit the Esc key to go to Main Edit Menu.