|
| |
|
ISDN: Configuring the Webramp
 | Operating System: Windows 95 |
| Hardware: Webramp Entré
|
|
- Click the Skip button.
- Read the To Do List.
- Click the Next button.
- Select Dynamic.
- Click the Next button.
- In the ISP's ISDN Phone # text box, type your local ISDN phone number. Do not type dashes.
- Select the Use 2 channels to connect to the ISP check box.
- For Authentication Parameters select PAP.
- In the Name field, type ELN/ immediately followed by your DigiTex username. For example: ELN/username
- Click the Set Password button
- In the Password text box, type your DigiTex password.
- In the Confirm Password text box, type your DigiTex password.
- Click the OK button.
- Click the Next button.
- Select the ISDN Switch Type from the list.
- In the ISDN phone number #1 text box, type your ISDN number.
- In the SPID 1 text box, type your Spid 1 number.
- In the ISDN phone number #2 text box, type your ISDN number.
- In the SPID 2 text box, type your Spid 2 number.
- Click the Next button.
- If you intend to use traditional analog telephone devices, such as a fax machine, analog modem, or telephone select them here.
- For Line 1 select Phone or Fax or Modem.
- For Line 2 select Phone or Fax or Modem.
- Click the Next button.
- For Would you like to enable DHCP?, check Yes.
- In the Primary DNS Server text box, type 206.160.192.10
- In the Alternate DNS Server text box, type 206.160.192.12
- In the Domain Name textbox, type digitex.net
- Click the Next button.
- Click the Next button.
- Click the Next button.
- Click the Next button.
- Click the Next button.
- Click the Finish button.
- Click the Exit Application button.
|
|
