Telco Options

1. AnsOrig = Both
2. Callback = No
3. Exp Callback = No
4. Call Type = Switched
5. Group = N/A
6. FT1 Caller = N/A
7. Data Svc = 64K ( Select 64K if you have 64K ISDN lines or leave at 56K )
8. Force 56 = N/A ( If Data Svc is set at 64K, this field will default to No )
9. Bill # = Leave blank
10. Press the Esc key.
11. Press the Esc key again.
12. Select Exit and accept
13. Press the Enter key.
14. Unplug the router for 5 seconds
15. Plug the router back in. Doing this will reset the router, the screen will then refresh.