|
| |
|
3com IQ for Windows 3.1
|
|
Connecting
|
- Double-click the Trumpet Winsock icon.
- From the Dialer menu, choose setup.cmd
- If your modem requires a specific initialization string, type it in the Modem
Initialization String text box. If it does not require a specific initialization string use the default.
- Click the OK button.
- In the Enter your phone number text box, type your local
DigiTex.net access number. Remember to check with your local telephone company to make sure that the number you choose is a local toll-free call.
 | If you are in an office and need to dial a number to access a telephone line, type it in front of your telephone number immediately followed by a comma.
For example: 9,
| If you wish to disable call waiting, type *70 before the telephone number, immediately followed by a comma. Not all areas use *70 to disable call waiting so if *70 does not work for you, contact your local telephone company for the correct code. Note that call waiting will always turn back on after you disconnect from
DigiTex.net.
| |
- Click the OK button.
- In the Enter your login username text box, type your
DigiTex.net username. For example: username
- Click the OK button.
- In the Enter your login password text box, type your
DigiTex.net password.
- Click the OK button.
|
|
