Note: Due to current state of ISDN technology, various telephone company switch types, routers,
and the staggered nature in which individual channel calls are placed,
DigiTex.net cannot guarantee
consistent dual channel connectivity at all times.
Use the Up and Down arrow keys to select fields.
Use the Enter key to modify fields.
Use the Esc key to go back a screen.
Use the Ctrl-L keys to refresh the screen.
Step 1 : Main Edit Menu
Select Configure and press the Enter key on your keyboard.
Step 2 & 3: Configure
Switch Type = Type the switch type provided by your local telephone company
Chan Usage = Switch/Switch
My Num A = Type your ISDN phone number for channel 1
My Num B = Type your ISDN phone number for channel 2
SPID 1 = Type your SPID number for ISDN channel 1
SPID 2 = Type your SPID number for ISDN channel 2
Data Usage = A+B
Phone 1 Usage = A
Phone 2 Usage = B
Phone Num Binding = No
My Name = Type your DigiTex.net username. For example: username
My Addr = Type 192.168.100.100/24
Rem Name = Type DigiTex.net (This must be the same as information as in step 18)
Rem Addr = Type 100.100.100.100/24
Dial = Type your local DigiTex.netEarth ISDN access number
Route = IP
NAT Routing = Yes The default is N/A. To set to yes scroll down and set the Bridge to No (step 19) then you can set the NAT Routing to Yes
NAT Profile = DigiTex.net (This must be the same as information as in step 13)
Bridge = No
Send Auth = PAP
Send PW = Type your DigiTex.net password
Recv Auth = None
Recv PW = N/A
Save = Press the Enter key to save settings
Hit the Esc key to go to Main Edit Menu.
Step 4: Ethernet
Select Ethernet.
Press the Enter key.
Select Connections.
Press the Enter key.
From the list, select digitex.net.
Press the Enter key.
Step 5: Connections
Station = This is a profile name. This has already been entered
Active = Yes
Encaps = MPP
Dial # = This field has already been entered
Calling # = Leave Blank
Called # = Leave Blank
Route IP = Yes
Route IPX = N/A
Bridge = No
Dial brdcast = N/A
Encaps options = Go to step 6: Encaps Options
Ip options = Go to step 7: IP Options
Ipx options = Skip
Session options = Skip
Telco options = Go to step 8: Telco options
Press the ESC key to go back.
Step 6: Encaps Options
Send Auth = PAP
Send PW = This field has already been entered
Aux Send PW = N/A
Recv PW = N/A
DBA Monitor = Transmit-Recv
Base Ch Count = Type 2
Min Ch Count = Type 2
Max Ch Count = Type 2
MRU = 1524
LQM = No
LQM Min = 600
LQM Max = 600
Link Comp = Stac
VJ Comp = Yes
Dyn Alg = Quadratic
Press the ESC key to go back.
Step 7: IP Options
LAN Adr = 100.100.100.100/24
Wan Alias = 0.0.0.0
If Adrs = 0.0.0.0/0
Preference = 100
Metric = 1
DownPreference = 120
DownMetric = 7
Private = No
RIP = Off
Client Pri DNS = 68.93.224.10
Client Sec DNS = 68.93.224.12
Client Assign DNS = No
Client Gateway = 0.0.0.0
Press the Esc key to go back.
Step 8: Telco options
AnsOrig = Both
Callback = No
Exp Callback = No
Call Type = Switched
Group = N/A
FT1 Caller = N/A
Data Svc = 64K ( Select 64K if you have 64K ISDN lines or leave at 56K )
Force 56 = N/A ( If Data Svc is set at 64K, this field will default to No )
Bill # = Leave blank
Press the Esc key.
Press the Esc key again.
Select Exit and accept
Press the Enter key.
Unplug the router for 5 seconds
Plug the router back in. Doing this will reset the router, the screen will then refresh.
