|
| | |
Installing Remote Access Service
- From Program Manager, double-click the Main Program Group icon.
- Double-click the Control Panel icon.
- Double-click the Network icon.
- If you are prompted to install Windows NT Networking, click the Yes
button and continue with the next step.
If the Network Settings windows opens:
- If Remote Access Service does not
appear in the list of Installed Network Software,
continue here.
- If Remote Access Service appears in the list
of Installed Network Software,
continue here.
- Enter the full path to the Windows NT installation files.
- Click the Continue button.
- Click the Do Not Detect button.
- Click the Remote button to install Remote Access Service.
- Check Connectivity Utilities.
- All other Components are optional.
- Uncheck Enable Automatic DHCP Configuration.
- Click the Continue button.
- Select the Port your modem is installed on.
- Click the OK button.
- Click the OK button to let Remote Access Setup attempt to detect
your modem.
- If your modem is detected, click the OK button. If your modem is not
detected, contact your modem manufacturer for an updated modem.inf file.
- For Port Usage, select Dial out only.
- Click the OK button.
- You may receive a notice that automatic restoration of network connections
has been disabled.
- Click the OK button.
- Click the Network button
- Uncheck NetBEUI.
- Click the OK button.
- Check TCP/IP.
- Uncheck IPX.
- Click the OK button.
- Click the Continue button.
- Click the OK button.
- If you receive a notice about NetBEUI, click the OK button.
- For Member of, select Workgroup.
- In the Workgroup box, type WORKGROUP.
- Click the OK button.
- Click the Restart Computer button.
Configuring Remote Access Service
- From Program Manager, double-click the Remote Access Service
Program Group icon.
- Double-click the Remote Access icon.
- If you receive a message that The phone book is empty, click
the OK button.
Otherwise, click the Add button.
- In the Entry Name box, type
DigiTex.net.
- In the Phone Number box, type your DigiTex.net.
- In the Description box, type
DigiTex.net.
- Uncheck Authenticate using current user name and password.
- Click the Advanced button.
- For Port, select the port your modem is installed on.
- Click the Modem button.
- For Initial speed (bps), select:
19200 for a 14400 modem
38400 for a 28800 or 33600 modem
57600 for a 56000 modem.
- Check all Hardware Features supported by your modem.
- Uncheck Enter modem commands manually.
- Click the OK button.
- Click the Network button.
- Select PPP
- Uncheck NetBEUI.
- Check TCP/IP.
- Uncheck IPX.
- Uncheck Request LCP extensions.
- Click the TCP/IP Settings button.
- Select Server assigned IP address.
- Select Server assigned name server addresses.
- Check Use VJ header compression.
- Check Use default gateway on remote network.
- Click the OK button.
- Click the OK button.
- Click the Security button.
- Select Accept any authentication including clear text.
- For both Before dialing and After dialing, choose (none).
- Click the OK button.
- Click the OK button.
Connecting to DigiTex.net
- Select your DigiTex.net entry.
- Click the Dial button.
- In the User Name box, type your username (e.g., username.
Note: your username must be in all lower case.)
- In the Password box, type your DigiTex.net password (Note: this is
case-sensitive).
- Do not enter anything in the Domain box. It must remain blank.
- Click the OK button.
- Check Minimize on dial.
- Check Do not display this message in the future.
- Click the OK button.
|
|
