1. Double-click the Internet Access program group.
2. Double click the Internet Dialer icon.
3. From the menu bar, click Options and select Preferences.
4. Select the box marked Administrative Mode (first box).
5. Make sure that there is an X mark in every box except the last.
6. Click the OK button to close the Preferences dialogue box.
   

   

7. From the menu bar, click Options and select Site Setup.
8. Make sure PPP is selected.
9. Click the Handshake button.
   

   

10. Click the Remove button until it turns gray and you can't click anymore.
11. Make sure CR on Connect is set to None.
12. Click the OK button to close the Handshake dialogue box.
    

    

13. Click the PPP Options button.
    

    

14. Check the PAP check box.
    

    

15. Click the OK button to close the PAP dialogue box.
16. Click the OK button to close the PPP dialogue box.
17. From the menu bar, click Options and select Session Setup.
18. In the User Name text box, type your dial-up username. For example: username
19. In the password text box, type your dial-up password.

    

20. Click the OK button to close the Session Setup dialogue box.
21. From the menu bar, click File and select Exit.
22. From the Program Manager menu bar, click File and select Exit Windows.
23. Restart your computer.
24. Open the Internet Access program group.
25. Double-click the Internet Dialer icon.
26. Click the Connect menu to connect to DigiTex.net Network.